FD30 fire doors in Perth: how we work
Fire Rated Doors supplies and fits FD30 fire doors in Perth, Perth & Kinross. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Surveys in Perth are booked around your access needs, and we cover the wider Perth & Kinross area too.
What the law says in Perth
Fire doors in Perth follow Scottish building standards for new work, with the Fire (Scotland) Act 2005 covering duties in workplaces and other non-domestic premises. Shared residential buildings may also be covered by licensing conditions, for example for HMOs.
FD30 fire doors prices in Perth
Our guide for FD30 fire doors is £750–£1,150 per single doorset fitted, ex VAT. Quotes for Perth are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD30 fire doors are needed
Wherever they are in Perth, FD30 fire doors are most often specified for HMO bedrooms and kitchens and offices and retail back-of-house.
Perth and Kinross mixes Perth's city centre and offices with rural hotels, schools and care homes.
- HMO bedrooms and kitchens
- Offices and retail back-of-house
- Hotel corridors
- Plant rooms and stores
What's in the doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD30 fire doors in Perth: questions
Do you work for landlords and managing agents in Perth?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you work around tenants or staff in Perth?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Perth free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Neighbouring areas
- Glenrothes (17 miles)
- Dundee (18 miles)
- Kirkcaldy (22 miles)
- Dunfermline (22 miles)
- Alloa (24 miles)
- Stirling (27 miles)
Other products in Perth
- Communal & Corridor Fire Doors in Perth
- FD30S Smoke Control Doorsets in Perth
- Stairwell & Escape Route Doors in Perth
- Double & Leaf-and-a-Half Fire Doors in Perth
- Composite Fire Doors in Perth
- Glazed Fire Doors in Perth
- Acoustic Fire Doors in Perth
- Timber Fire Doorsets in Perth
- FD30 Fire Doorsets across Perth & Kinross
- All fire doors in Perth