Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30E30 / EI3044mm leaf

FD30 Fire Doorsets in Glasgow & Dunbartonshire

We supply and fit FD30 fire doors throughout Glasgow & Dunbartonshire, including Glasgow, Bearsden and Clydebank, as complete certified doorsets with a free survey and a fixed, itemised quote.

From £750 per single doorset in Glasgow & Dunbartonshire, supplied & fitted, ex VAT

White painted flush timber fire door with overhead closer in an office corridor

FD30 Fire Doorsets for Glasgow & Dunbartonshire buildings

Our Glasgow & Dunbartonshire service covers FD30 fire doors for flats, HMOs, workplaces, schools and homes, including Glasgow, Bearsden and Clydebank.

What the law says in Glasgow & Dunbartonshire

Scotland has its own system: new and replacement fire doors in Glasgow & Dunbartonshire are designed to the Building (Scotland) Regulations 2004 and the Technical Handbooks (Section 2, Fire). For non-domestic premises, the Fire (Scotland) Act 2005 and the Fire Safety (Scotland) Regulations 2006 place duties on whoever controls the building.

Cost of FD30 fire doors in Glasgow & Dunbartonshire

Guide prices for FD30 fire doors in Glasgow & Dunbartonshire run from about £750 to £1,150 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Typical uses in Glasgow & Dunbartonshire

Glasgow has Scotland's largest stock of tenements and high-rise flats, plus extensive student housing and offices in the city centre.

  • Offices and retail back-of-house
  • HMO bedrooms and kitchens
  • Hotel corridors
  • Plant rooms and stores

FD30 Fire Doorsets: key specification

Fire resistance30 minutes integrity (FD30 / E30); EI30 where insulation is specified
Typical leaf44mm timber, flush or with vision panel
Test evidenceBS 476-22 or BS EN 1634-1, plus the manufacturer's field of application
CloserOverhead closer to BS EN 1154 (except locked cupboards)
HingesThree CE/UKCA-marked hinges to BS EN 1935, grade 13 typical
Elevation drawing of fd30 fire doorsets

See the full specification and options for FD30 Fire Doorsets

What happens next

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in Glasgow & Dunbartonshire

Will I get certificates for the doors fitted?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Is the survey free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Which rules apply in Glasgow & Dunbartonshire?

Doors are specified to the Scottish Building Standards Technical Handbooks and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Can I fit an FD30 door into my existing frame?

Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.

Towns in Glasgow & Dunbartonshire we cover for FD30 fire doors

FD30 Fire Doorsets in neighbouring areas

Other fire doors in Glasgow & Dunbartonshire

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.