Certified riser cupboard fire doors for Newtown
Getting riser cupboard fire doors right in Newtown means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover Newtown and the rest of Powys, with surveys arranged around your building's access and occupancy.
Fire door rules in Newtown
Fire doors in Newtown are covered by the Welsh Building Regulations guidance for new work and by the Fire Safety Order 2005 for existing premises. Your fire risk assessment will say which doors need replacing and to what rating.
Riser cupboard fire doors prices in Newtown
Expect roughly £550–£950 per single doorset for riser cupboard fire doors, fitted, ex VAT. Your Newtown quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where riser cupboard fire doors are used in Newtown
In Newtown, riser cupboard fire doors are typically needed in meter cupboards and electrical and data risers.
Powys is mostly rural, with schools, care homes, hotels and converted agricultural and period buildings in towns such as Newtown and Brecon.
- Meter cupboards
- Electrical and data risers
- Plumbing ducts
- Bin and store cupboards
Doorset specification
| Rating | At least half the shaft wall's rating, 30 minutes minimum — FD30 typical |
|---|---|
| Closing | Kept locked shut; self-closer not normally required |
| Locking | Flush cylinder or budget lock, tested with the door |
| Finish | Flush, painted or laminated to match the corridor |
| Signage | Fire door keep locked |
See the full specification and options for Riser & Service Cupboard Doors
How it works in Newtown
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about riser cupboard fire doors in Newtown
Can you fit just one door in Newtown?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Powys.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Newtown.
Will I get certificates for the doors fitted in Newtown?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What rating does a riser door need?
In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.
Neighbouring areas
- Shrewsbury (27 miles)
- Wellington (36 miles)
- Rhosllannerchrugog (36 miles)
- Telford (38 miles)
- Brecon (39 miles)
- Wrexham (39 miles)
Other fire doors in Newtown
- FD30S Smoke Control Doorsets in Newtown
- Fire Door Ironmongery & Closers in Newtown
- Fire Door Supply & Fit in Newtown
- FD60 Fire Doorsets in Newtown
- Fire Door Replacement in Newtown
- HMO Fire Doors in Newtown
- Security Fire Doors in Newtown
- Double & Leaf-and-a-Half Fire Doors in Newtown
- Riser & Service Cupboard Doors across Powys
- All fire doors in Newtown