Our Telford supply and fit service
Getting riser cupboard fire doors right in Telford means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Surveys in Telford are booked around your access needs, and we cover the wider Shropshire area too.
What the law says in Telford
Because Telford is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do riser cupboard fire doors cost in Telford?
Our guide price for riser cupboard fire doors in Telford is £550 to £950 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where riser cupboard fire doors are needed
Bin and store cupboards and electrical and data risers are among the most common settings for riser cupboard fire doors, in Telford as elsewhere.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Bin and store cupboards
- Electrical and data risers
- Meter cupboards
- Plumbing ducts
What you get with each doorset
| Rating | At least half the shaft wall's rating, 30 minutes minimum — FD30 typical |
|---|---|
| Closing | Kept locked shut; self-closer not normally required |
| Locking | Flush cylinder or budget lock, tested with the door |
| Finish | Flush, painted or laminated to match the corridor |
| Signage | Fire door keep locked |
See the full specification and options for Riser & Service Cupboard Doors
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about riser cupboard fire doors in Telford
What does a Telford quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Telford?
We arrange surveys around your access needs and, where possible, combine Telford visits with other work in Shropshire. Tell us your preferred dates when you enquire.
Do you cover Telford?
Yes. We survey, supply and fit riser cupboard fire doors throughout Telford and the rest of Shropshire, including TF4 and nearby Wellington.
Do you fire-stop the riser itself?
Fire-stopping is specialist work outside our doorset scope, but we report gaps we see so you can get them addressed.
Riser & Service Cupboard Doors near Telford
- Wellington (3 miles)
- Shrewsbury (13 miles)
- Wolverhampton (15 miles)
- Wednesfield (16 miles)
- Stafford (17 miles)
- Kingswinford (17 miles)
Other fire doors in Telford
- Fire-Rated Screens & Fanlights in Telford
- Fire Exit Doors in Telford
- Flat Entrance Fire Doors in Telford
- Stairwell & Escape Route Doors in Telford
- Double & Leaf-and-a-Half Fire Doors in Telford
- FD90 & FD120 Doorsets in Telford
- Fire Door Supply & Fit in Telford
- Commercial & Office Fire Doors in Telford
- Riser & Service Cupboard Doors across Shropshire
- All fire doors in Telford