Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30 typicalKeep lockedFlush

Riser & Service Cupboard Doors in Brecon

We supply and fit riser cupboard fire doors in Brecon (LD3) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £550 per single doorset in Brecon, supplied & fitted, ex VAT

Flush painted service riser cupboard door set into a corridor wall

Riser & Service Cupboard Doors for Brecon buildings

Fire Rated Doors supplies and fits riser cupboard fire doors in Brecon, Powys. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.

Brecon is about 39 miles from Newtown. Wherever your building is in LD3, we arrange survey and fitting dates around access and occupancy.

Which rules apply in Brecon?

Fire doors in Brecon are covered by the Welsh Building Regulations guidance for new work and by the Fire Safety Order 2005 for existing premises. Your fire risk assessment will say which doors need replacing and to what rating.

Guide prices in Brecon

Guide prices for riser cupboard fire doors in Brecon run from about £550 to £950 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Typical uses in Brecon

In Brecon, riser cupboard fire doors are typically needed in plumbing ducts and meter cupboards.

Powys is mostly rural, with schools, care homes, hotels and converted agricultural and period buildings in towns such as Newtown and Brecon.

  • Plumbing ducts
  • Meter cupboards
  • Bin and store cupboards
  • Electrical and data risers

Riser & Service Cupboard Doors: key specification

RatingAt least half the shaft wall's rating, 30 minutes minimum — FD30 typical
ClosingKept locked shut; self-closer not normally required
LockingFlush cylinder or budget lock, tested with the door
FinishFlush, painted or laminated to match the corridor
SignageFire door keep locked
Elevation drawing of riser & service cupboard doors

See the full specification and options for Riser & Service Cupboard Doors

Four steps to compliant doors

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in Powys

What does a Brecon quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

Which rules do riser cupboard fire doors in Brecon need to meet?

They are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Will I get certificates for the doors fitted in Brecon?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

What rating does a riser door need?

In England, Approved Document B generally asks for at least half the fire resistance of the shaft wall, with a 30-minute minimum — so FD30 is typical, rising to FD60 for 120-minute shafts. Your fire strategy confirms it.

Nearby towns we cover

More doorsets for Brecon

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.