Fire door closers and ironmongery in Hampton: how we work
Fire Rated Doors supplies and fits fire door closers and ironmongery in Hampton, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Where possible we combine Hampton surveys with other visits in Greater London, such as Hanworth and Sunbury-on-Thames, which helps keep survey dates flexible.
Fire door rules in Hampton
Because Hampton is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Fire door closers and ironmongery prices in Hampton
Our guide price for fire door closers and ironmongery in Hampton is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Hampton
Wherever they are in Hampton, fire door closers and ironmongery are most often specified for busy corridors needing hold-open and failed closers and hinges.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Busy corridors needing hold-open
- Failed closers and hinges
- Access control preparation
- Seal and signage replacement
Fire Door Ironmongery & Closers: key specification
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door closers and ironmongery in Hampton: questions
What does a Hampton quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Hampton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Is the survey in Hampton free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Neighbouring areas
- Hanworth (1 mile)
- Sunbury-on-Thames (2 miles)
- Walton-on-Thames (2 miles)
- Esher (3 miles)
- Feltham (3 miles)
- Surbiton (3 miles)
Other fire doors in Hampton
- School & Healthcare Fire Doors in Hampton
- Double & Leaf-and-a-Half Fire Doors in Hampton
- Composite Fire Doors in Hampton
- Security Fire Doors in Hampton
- Communal & Corridor Fire Doors in Hampton
- FD30 Fire Doorsets in Hampton
- Stairwell & Escape Route Doors in Hampton
- Fire Door Replacement in Hampton
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Hampton