Our Surbiton supply and fit service
Fire Rated Doors supplies and fits fire door closers and ironmongery in Surbiton, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Our Greater London coverage includes Surbiton and its neighbours New Malden, Esher and Hampton; tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for fire door closers and ironmongery in Greater London
New and replacement fire doors in Surbiton are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Fire door closers and ironmongery prices in Surbiton
Guide prices for fire door closers and ironmongery in Surbiton run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where fire door closers and ironmongery are used in Surbiton
Wherever they are in Surbiton, fire door closers and ironmongery are most often specified for seal and signage replacement and failed closers and hinges.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
What you get with each doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about fire door closers and ironmongery in Surbiton
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Surbiton.
Can you work around tenants or staff in Surbiton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Can you fit just one door in Surbiton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Also covering towns near Surbiton
Other fire doors in Surbiton
- Double & Leaf-and-a-Half Fire Doors in Surbiton
- Flat Entrance Fire Doors in Surbiton
- Security Fire Doors in Surbiton
- Commercial & Office Fire Doors in Surbiton
- Fire-Rated Screens & Fanlights in Surbiton
- Acoustic Fire Doors in Surbiton
- FD30 Fire Doorsets in Surbiton
- FD90 & FD120 Doorsets in Surbiton
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Surbiton