Certified fire door closers and ironmongery for Hanworth
If your fire risk assessment in Hanworth has flagged doors to replace, we can schedule, quote and fit fire door closers, hinges and hold-open devices to match its recommendations. Surveys in TW13 are free and quotes are fixed and itemised.
Hanworth is about 12 miles from London. Wherever your building is in TW13, we arrange survey and fitting dates around access and occupancy.
What the law says in Hanworth
In Hanworth, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of fire door closers and ironmongery in Greater London
Our guide price for fire door closers and ironmongery in Hanworth is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Hanworth
Access control preparation and seal and signage replacement are among the most common settings for fire door closers and ironmongery, in Hanworth as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
- Failed closers and hinges
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about fire door closers and ironmongery in Hanworth
What does a Hanworth quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do fire door closers and ironmongery in Hanworth need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Hanworth free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Fire Door Ironmongery & Closers near Hanworth
- Hampton (1 mile)
- Feltham (2 miles)
- Sunbury-on-Thames (2 miles)
- Hounslow (2 miles)
- Ashford, Surrey (3 miles)
- Isleworth (3 miles)
Other products in Hanworth
- Glazed Fire Doors in Hanworth
- FD30S Smoke Control Doorsets in Hanworth
- Communal & Corridor Fire Doors in Hanworth
- Stairwell & Escape Route Doors in Hanworth
- Fire Exit Doors in Hanworth
- Commercial & Office Fire Doors in Hanworth
- Timber Fire Doorsets in Hanworth
- Steel Fire Doors in Hanworth
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Hanworth