Our Hampton supply and fit service
We cover Hampton and nearby Hanworth for FD30 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Where possible we combine Hampton surveys with other visits in Greater London, such as Hanworth and Sunbury-on-Thames, which helps keep survey dates flexible.
Regulations for FD30 fire doors in Greater London
Because Hampton is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD30 fire doors in Greater London
Budget around £750 to £1,150 per single doorset for FD30 fire doors supplied and fitted in Hampton, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Buildings that need FD30 fire doors
Typical uses for FD30 fire doors in Hampton include hotel corridors and plant rooms and stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Hotel corridors
- Plant rooms and stores
- Offices and retail back-of-house
- HMO bedrooms and kitchens
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD30 fire doors in Hampton
Do you cover Hampton?
Yes. We survey, supply and fit FD30 fire doors throughout Hampton and the rest of Greater London, including TW12 and nearby Hanworth.
Is the survey in Hampton free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Will I get certificates for the doors fitted in Hampton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Also covering towns near Hampton
- Hanworth (1 mile)
- Sunbury-on-Thames (2 miles)
- Walton-on-Thames (2 miles)
- Esher (3 miles)
- Feltham (3 miles)
- Surbiton (3 miles)
Also available in Hampton
- Timber Fire Doorsets in Hampton
- Stairwell & Escape Route Doors in Hampton
- HMO Fire Doors in Hampton
- Fire Door Replacement in Hampton
- Double & Leaf-and-a-Half Fire Doors in Hampton
- Glazed Fire Doors in Hampton
- FD60 Fire Doorsets in Hampton
- Riser & Service Cupboard Doors in Hampton
- FD30 Fire Doorsets across Greater London
- All fire doors in Hampton