Fire door closers and ironmongery in Sunbury-on-Thames: how we work
Need fire door closers and ironmongery in Sunbury-on-Thames? We supply and fit complete certified doorsets across Surrey, starting with a free measure survey in and around TW16. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
We cover TW16 and the surrounding area, including Walton-on-Thames. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Sunbury-on-Thames
New and replacement fire doors in Sunbury-on-Thames are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Cost of fire door closers and ironmongery in Surrey
Guide prices for fire door closers and ironmongery in Sunbury-on-Thames run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where fire door closers and ironmongery are needed
Failed closers and hinges and access control preparation are among the most common settings for fire door closers and ironmongery, in Sunbury-on-Thames as elsewhere.
Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.
- Failed closers and hinges
- Access control preparation
- Seal and signage replacement
- Busy corridors needing hold-open
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
How it works in Sunbury-on-Thames
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Your questions answered
What does a Sunbury-on-Thames quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Which rules do fire door closers and ironmongery in Sunbury-on-Thames need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Sunbury-on-Thames.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Nearby towns we cover
- Walton-on-Thames (1 mile)
- Hampton (2 miles)
- Hanworth (2 miles)
- Ashford, Surrey (2 miles)
- Feltham (3 miles)
- Esher (3 miles)
Other fire doors in Sunbury-on-Thames
- Fire-Rated Screens & Fanlights in Sunbury-on-Thames
- Commercial & Office Fire Doors in Sunbury-on-Thames
- Fire Exit Doors in Sunbury-on-Thames
- Timber Fire Doorsets in Sunbury-on-Thames
- Fire Door Replacement in Sunbury-on-Thames
- FD30S Smoke Control Doorsets in Sunbury-on-Thames
- Riser & Service Cupboard Doors in Sunbury-on-Thames
- Stairwell & Escape Route Doors in Sunbury-on-Thames
- Fire Door Ironmongery & Closers across Surrey
- All fire doors in Sunbury-on-Thames