Fire door closers and ironmongery in Enfield: how we work
Fire Rated Doors supplies and fits fire door closers and ironmongery in Enfield, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover EN2 and the surrounding area, including Edmonton. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Enfield
In Enfield, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of fire door closers and ironmongery in Greater London
Our guide price for fire door closers and ironmongery in Enfield is £120 to £500 per item including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need fire door closers and ironmongery
Access control preparation and seal and signage replacement are among the most common settings for fire door closers and ironmongery, in Enfield as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Access control preparation
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about fire door closers and ironmongery in Enfield
Is the survey in Enfield free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What does a Enfield quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Enfield?
We arrange surveys around your access needs and, where possible, combine Enfield visits with other work in Greater London. Tell us your preferred dates when you enquire.
Can I use any hinge on a fire door?
No. Hinges should be CE/UKCA marked to BS EN 1935 and suitable for the door's weight and rating.
Fire Door Ironmongery & Closers near Enfield
- Edmonton (2 miles)
- Tottenham (3 miles)
- Hadley Wood (4 miles)
- Wood Green (4 miles)
- Chingford (4 miles)
- Cheshunt (4 miles)
Other products in Enfield
- Steel Fire Doors in Enfield
- FD30S Smoke Control Doorsets in Enfield
- Stairwell & Escape Route Doors in Enfield
- Communal & Corridor Fire Doors in Enfield
- Acoustic Fire Doors in Enfield
- Fire Door Replacement in Enfield
- Riser & Service Cupboard Doors in Enfield
- Glazed Fire Doors in Enfield
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Enfield