Fire Door Supply & Fit for Wellington buildings
Getting fire door installation right in Wellington means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Our Shropshire coverage includes Wellington and its neighbours Telford, Shrewsbury and Stafford; tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Wellington?
Because Wellington is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Wellington
Our guide price for fire door installation in Wellington is £750 to £1,150 per FD30 doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where fire door installation are used in Wellington
Typical uses for fire door installation in Wellington include landlords and managing agents and contractors and fit-out firms.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Landlords and managing agents
- Contractors and fit-out firms
- Schools, care and healthcare estates
- Single doors to full-building programmes
What you get with each doorset
| Survey | Free measure survey and door-by-door schedule |
|---|---|
| Quote | Fixed, itemised, with manufacturer certificate references |
| Installation | To the manufacturer's instructions and BS 8214:2026 guidance |
| Installers | Scheme and certificate numbers confirmed in writing where the doorset requires a certificated installer |
| Handover | Certificate references, installation record, photos, maintenance notes |
See the full specification and options for Fire Door Supply & Fit
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Fire door installation in Wellington: questions
Will I get certificates for the doors fitted in Wellington?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wellington.
Can you work around tenants or staff in Wellington?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you supply fire doors without fitting?
We focus on supply and fit, because certification usually depends on correct installation. Talk to us if you have a contractor-led project.
Nearby towns we cover
- Telford (3 miles)
- Shrewsbury (10 miles)
- Stafford (18 miles)
- Wolverhampton (18 miles)
- Wednesfield (19 miles)
- Kingswinford (20 miles)
Other fire doors in Wellington
- FD30S Smoke Control Doorsets in Wellington
- Timber Fire Doorsets in Wellington
- FD90 & FD120 Doorsets in Wellington
- Fire Door Ironmongery & Closers in Wellington
- FD60 Fire Doorsets in Wellington
- Security Fire Doors in Wellington
- Steel Fire Doors in Wellington
- Riser & Service Cupboard Doors in Wellington
- Fire Door Supply & Fit across Shropshire
- All fire doors in Wellington