Certified FD90 and FD120 fire doors for Warwick
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Warwick, Warwickshire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Warwick is about 17 miles from Nuneaton; we cover both, along with Leamington Spa, Kenilworth and Stratford-upon-Avon.
What the law says in Warwick
Because Warwick is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Warwick
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Warwick are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Warwick
Generator rooms and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Warwick as elsewhere.
Warwickshire mixes Nuneaton and Rugby's logistics and new estates with Leamington and Stratford's period conversions and hotels.
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Questions about FD90 and FD120 fire doors in Warwick
Do you work for landlords and managing agents in Warwick?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you work around tenants or staff in Warwick?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is the survey in Warwick free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Also covering towns near Warwick
- Leamington Spa (2 miles)
- Kenilworth (4 miles)
- Stratford-upon-Avon (8 miles)
- Coventry (9 miles)
- Solihull (12 miles)
- Shirley (13 miles)
Other fire doors in Warwick
- FD30S Smoke Control Doorsets in Warwick
- School & Healthcare Fire Doors in Warwick
- Fire Exit Doors in Warwick
- Acoustic Fire Doors in Warwick
- FD60 Fire Doorsets in Warwick
- FD30 Fire Doorsets in Warwick
- Fire Door Ironmongery & Closers in Warwick
- Riser & Service Cupboard Doors in Warwick
- FD90 & FD120 Doorsets across Warwickshire
- All fire doors in Warwick