Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Walton-on-Thames

We supply and fit FD30S fire doors in Walton-on-Thames (KT12) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £800 per single doorset in Walton-on-Thames, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

FD30S Smoke Control Doorsets for Walton-on-Thames buildings

We fit FD30S smoke control doorsets for flats, stairs and corridors in Walton-on-Thames and the rest of Surrey. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.

Walton-on-Thames is about 8 miles from Woking; we cover both, along with Sunbury-on-Thames, Esher and Hampton.

Which rules apply in Walton-on-Thames?

New and replacement fire doors in Walton-on-Thames are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.

Cost of FD30S fire doors in Surrey

Our guide price for FD30S fire doors in Walton-on-Thames is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Where FD30S fire doors are used in Walton-on-Thames

In Walton-on-Thames, FD30S fire doors are typically needed in cross-corridor doors and protected stairways.

Surrey's commuter towns have many office-to-residential conversions and new apartment schemes, plus independent schools and care homes.

  • Cross-corridor doors
  • Protected stairways
  • Integral garage doors
  • Lobby doors in blocks of flats

What's in the doorset

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

From enquiry to handover

  1. Tell us about the doors — photos help
  2. Free measure survey at your Walton-on-Thames property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Your questions answered

Will I get certificates for the doors fitted in Walton-on-Thames?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

Is the survey in Walton-on-Thames free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Walton-on-Thames.

Do smoke seals stop the door closing?

They shouldn't. A properly hung FD30S door closes and latches under its closer. If seals are crushed or the door binds, it needs adjusting — a door that fails to latch is a failed fire door.

Nearby towns we cover

More doorsets for Walton-on-Thames

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.