Certified FD90 and FD120 fire doors for Hampton
For landlords, managing agents, businesses and homeowners in Hampton, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Hampton is about 12 miles from London; we cover both, along with Hanworth, Sunbury-on-Thames and Walton-on-Thames.
Which rules apply in Hampton?
Fire doors in Hampton sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD90 and FD120 fire doors in Greater London
Our guide price for FD90 and FD120 fire doors in Hampton is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Buildings that need FD90 and FD120 fire doors
In Hampton, FD90 and FD120 fire doors are typically needed in high fire-load stores and generator rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Hampton
Can you fit just one door in Hampton?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Will I get certificates for the doors fitted in Hampton?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Which rules do FD90 and FD120 fire doors in Hampton need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
Also covering towns near Hampton
- Hanworth (1 mile)
- Sunbury-on-Thames (2 miles)
- Walton-on-Thames (2 miles)
- Esher (3 miles)
- Feltham (3 miles)
- Surbiton (3 miles)
Other fire doors in Hampton
- Fire Door Replacement in Hampton
- Stairwell & Escape Route Doors in Hampton
- Fire Door Supply & Fit in Hampton
- Fire Doors for Homes in Hampton
- Steel Fire Doors in Hampton
- FD30S Smoke Control Doorsets in Hampton
- Fire Exit Doors in Hampton
- Double & Leaf-and-a-Half Fire Doors in Hampton
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Hampton