Certified FD90 and FD120 fire doors for Hanworth
We cover Hanworth and nearby Hampton for FD90 and FD120 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
Where possible we combine Hanworth surveys with other visits in Greater London, such as Hampton and Feltham, which helps keep survey dates flexible.
What the law says in Hanworth
Because Hanworth is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Greater London
Our guide price for FD90 and FD120 fire doors in Hanworth is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Hanworth
In Hanworth, FD90 and FD120 fire doors are typically needed in transformer and switch rooms and separating walls with long ratings.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Transformer and switch rooms
- Separating walls with long ratings
- High fire-load stores
- Generator rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
How quickly can you survey in Hanworth?
We arrange surveys around your access needs and, where possible, combine Hanworth visits with other work in Greater London. Tell us your preferred dates when you enquire.
Which rules do FD90 and FD120 fire doors in Hanworth need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What does a Hanworth quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Hampton (1 mile)
- Feltham (2 miles)
- Sunbury-on-Thames (2 miles)
- Hounslow (2 miles)
- Ashford, Surrey (3 miles)
- Isleworth (3 miles)
Other products in Hanworth
- Fire Door Supply & Fit in Hanworth
- Fire Door Replacement in Hanworth
- Commercial & Office Fire Doors in Hanworth
- Steel Fire Doors in Hanworth
- Riser & Service Cupboard Doors in Hanworth
- School & Healthcare Fire Doors in Hanworth
- Timber Fire Doorsets in Hanworth
- FD60 Fire Doorsets in Hanworth
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Hanworth