Certified double fire doors for Wellington
Getting double fire doors right in Wellington means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Wellington is about 3 miles from Telford. Wherever your building is in TF1, we arrange survey and fitting dates around access and occupancy.
Regulations for double fire doors in Shropshire
Because Wellington is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Wellington
Our guide for double fire doors is £1,600–£3,400 per pair fitted, ex VAT. Quotes for Wellington are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where double fire doors are used in Wellington
Wherever they are in Wellington, double fire doors are most often specified for wide risers and plant room access.
Shropshire runs from Telford's modern industrial estates to Shrewsbury's historic centre and rural care and hospitality buildings.
- Wide risers
- Plant room access
- Cross-corridor openings
- Care and hospital routes
What you get with each doorset
| Configurations | Equal pairs, unequal (leaf-and-a-half), rebated or square meeting stiles |
|---|---|
| Coordination | Door selectors to BS EN 1158 for rebated pairs |
| Bolts | Tested flush bolts on inactive leaves (not on escape routes) |
| Hold-open | Alarm-linked hold-open per leaf where needed |
| Ratings | FD30S and FD60S typical |
See the full specification and options for Double & Leaf-and-a-Half Fire Doors
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Which rules do double fire doors in Wellington need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wellington.
Do you cover Wellington?
Yes. We survey, supply and fit double fire doors throughout Wellington and the rest of Shropshire, including TF1 and nearby Telford.
Do pairs cost much more than singles?
Roughly 1.7 to 2 times a single doorset, depending on hardware.
Nearby towns we cover
- Telford (3 miles)
- Shrewsbury (10 miles)
- Stafford (18 miles)
- Wolverhampton (18 miles)
- Wednesfield (19 miles)
- Kingswinford (20 miles)
Other products in Wellington
- Riser & Service Cupboard Doors in Wellington
- Fire Door Replacement in Wellington
- Stairwell & Escape Route Doors in Wellington
- Steel Fire Doors in Wellington
- FD60 Fire Doorsets in Wellington
- Glazed Fire Doors in Wellington
- Fire Door Supply & Fit in Wellington
- Composite Fire Doors in Wellington
- Double & Leaf-and-a-Half Fire Doors across Shropshire
- All fire doors in Wellington