Our Wednesfield supply and fit service
If your fire risk assessment in Wednesfield has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in WV11 are free and quotes are fixed and itemised.
Wednesfield is about 11 miles from Birmingham. Wherever your building is in WV11, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Wednesfield
Because Wednesfield is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD90 and FD120 fire doors cost in Wednesfield?
Our guide price for FD90 and FD120 fire doors in Wednesfield is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Wednesfield
Separating walls with long ratings and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Wednesfield as elsewhere.
Birmingham has one of the UK's largest collections of residential tower blocks and city-centre apartments, with the Black Country towns adding industry, schools and HMOs.
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Wednesfield: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wednesfield.
How quickly can you survey in Wednesfield?
We arrange surveys around your access needs and, where possible, combine Wednesfield visits with other work in West Midlands. Tell us your preferred dates when you enquire.
Will I get certificates for the doors fitted in Wednesfield?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Neighbouring areas
- Willenhall (1 mile)
- Wolverhampton (2 miles)
- Bloxwich (4 miles)
- Wednesbury (4 miles)
- Walsall (4 miles)
- Tipton (5 miles)
More doorsets for Wednesfield
- Double & Leaf-and-a-Half Fire Doors in Wednesfield
- Fire Door Ironmongery & Closers in Wednesfield
- Commercial & Office Fire Doors in Wednesfield
- Stairwell & Escape Route Doors in Wednesfield
- FD30S Smoke Control Doorsets in Wednesfield
- Glazed Fire Doors in Wednesfield
- Composite Fire Doors in Wednesfield
- Riser & Service Cupboard Doors in Wednesfield
- FD90 & FD120 Doorsets across West Midlands
- All fire doors in Wednesfield