Getting FD60 fire doors fitted in Preston
Fire Rated Doors supplies and fits FD60 fire doors in Preston, Lancashire. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Surveys in Preston are booked around your access needs, and we cover the wider Lancashire area too.
Which rules apply in Preston?
Because Preston is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do FD60 fire doors cost in Preston?
Guide prices for FD60 fire doors in Preston run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Buildings that need FD60 fire doors
Typical uses for FD60 fire doors in Preston include plant and boiler rooms and compartment walls.
Lancashire combines former mill towns, Preston's city centre, Blackpool's hotels and guest houses, and Lancaster's student housing.
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
- Stair cores in taller blocks
FD60 Fire Doorsets: key specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Preston
Which rules do FD60 fire doors in Preston need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Preston?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Preston.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
FD60 Fire Doorsets near Preston
- Leyland (4 miles)
- Chorley (9 miles)
- Blackburn (9 miles)
- Darwen (11 miles)
- Lytham St Annes (12 miles)
- Accrington (14 miles)
Other products in Preston
- Fire Door Replacement in Preston
- FD30S Smoke Control Doorsets in Preston
- HMO Fire Doors in Preston
- Fire Doors for Homes in Preston
- Security Fire Doors in Preston
- Fire Door Ironmongery & Closers in Preston
- Flat Entrance Fire Doors in Preston
- Composite Fire Doors in Preston
- FD60 Fire Doorsets across Lancashire
- All fire doors in Preston