Certified FD90 and FD120 fire doors for Margate
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Margate and the rest of Kent. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Where possible we combine Margate surveys with other visits in Kent, such as Broadstairs and Ramsgate, which helps keep survey dates flexible.
Regulations for FD90 and FD120 fire doors in Kent
In Margate, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Guide prices in Margate
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Margate quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD90 and FD120 fire doors are used in Margate
Typical uses for FD90 and FD120 fire doors in Margate include generator rooms and high fire-load stores.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
- Transformer and switch rooms
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Margate
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Margate
Is the survey in Margate free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Margate.
Can you work around tenants or staff in Margate?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Neighbouring areas
- Broadstairs (3 miles)
- Ramsgate (4 miles)
- Deal (11 miles)
- Herne Bay (11 miles)
- Canterbury (15 miles)
- Whitstable (16 miles)
Other products in Margate
- FD60 Fire Doorsets in Margate
- HMO Fire Doors in Margate
- Communal & Corridor Fire Doors in Margate
- Fire-Rated Screens & Fanlights in Margate
- Riser & Service Cupboard Doors in Margate
- Fire Door Replacement in Margate
- Fire Door Supply & Fit in Margate
- Timber Fire Doorsets in Margate
- FD90 & FD120 Doorsets across Kent
- All fire doors in Margate