FD90 and FD120 fire doors in Canterbury: how we work
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Canterbury, Kent. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
We cover CT1 and the surrounding area, including Whitstable. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Regulations for FD90 and FD120 fire doors in Kent
Fire doors in Canterbury sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
FD90 and FD120 fire doors prices in Canterbury
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Canterbury quote is fixed after survey and itemised door by door.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Transformer and switch rooms and generator rooms are among the most common settings for FD90 and FD120 fire doors, in Canterbury as elsewhere.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Transformer and switch rooms
- Generator rooms
- High fire-load stores
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD90 and FD120 fire doors in Canterbury: questions
Do you work for landlords and managing agents in Canterbury?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Will I get certificates for the doors fitted in Canterbury?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What does a Canterbury quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Whitstable (6 miles)
- Herne Bay (7 miles)
- Faversham (9 miles)
- Ashford, Kent (13 miles)
- Folkestone (14 miles)
- Deal (14 miles)
Also available in Canterbury
- Composite Fire Doors in Canterbury
- Fire Doors for Homes in Canterbury
- FD30S Smoke Control Doorsets in Canterbury
- Commercial & Office Fire Doors in Canterbury
- Timber Fire Doorsets in Canterbury
- Steel Fire Doors in Canterbury
- Fire Exit Doors in Canterbury
- Flat Entrance Fire Doors in Canterbury
- FD90 & FD120 Doorsets across Kent
- All fire doors in Canterbury