Our Margate supply and fit service
Fire Rated Doors supplies and fits riser cupboard fire doors in Margate, Kent. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Margate is about 39 miles from Maidstone; we cover both, along with Broadstairs, Ramsgate and Deal.
Which rules apply in Margate?
Because Margate is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
What do riser cupboard fire doors cost in Margate?
Our guide price for riser cupboard fire doors in Margate is £550 to £950 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where riser cupboard fire doors are needed
Bin and store cupboards and plumbing ducts are among the most common settings for riser cupboard fire doors, in Margate as elsewhere.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Bin and store cupboards
- Plumbing ducts
- Meter cupboards
- Electrical and data risers
Riser & Service Cupboard Doors: key specification
| Rating | At least half the shaft wall's rating, 30 minutes minimum — FD30 typical |
|---|---|
| Closing | Kept locked shut; self-closer not normally required |
| Locking | Flush cylinder or budget lock, tested with the door |
| Finish | Flush, painted or laminated to match the corridor |
| Signage | Fire door keep locked |
See the full specification and options for Riser & Service Cupboard Doors
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Margate property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Kent
Will I get certificates for the doors fitted in Margate?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Margate.
What does a Margate quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you fire-stop the riser itself?
Fire-stopping is specialist work outside our doorset scope, but we report gaps we see so you can get them addressed.
Neighbouring areas
- Broadstairs (3 miles)
- Ramsgate (4 miles)
- Deal (11 miles)
- Herne Bay (11 miles)
- Canterbury (15 miles)
- Whitstable (16 miles)
Other fire doors in Margate
- HMO Fire Doors in Margate
- School & Healthcare Fire Doors in Margate
- Flat Entrance Fire Doors in Margate
- Fire Doors for Homes in Margate
- Fire-Rated Screens & Fanlights in Margate
- Steel Fire Doors in Margate
- Glazed Fire Doors in Margate
- Timber Fire Doorsets in Margate
- Riser & Service Cupboard Doors across Kent
- All fire doors in Margate