FD90 & FD120 Doorsets for Whitstable buildings
For landlords, managing agents, businesses and homeowners in Whitstable, we provide FD90 and FD120 steel doorsets for plant and high-risk rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Whitstable is about 23 miles from Maidstone; we cover both, along with Herne Bay, Canterbury and Faversham.
Regulations for FD90 and FD120 fire doors in Kent
Because Whitstable is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD90 and FD120 fire doors in Kent
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Whitstable, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are needed
Generator rooms and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Whitstable as elsewhere.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
- Separating walls with long ratings
Doorset specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
How it works in Whitstable
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Kent
Do you work for landlords and managing agents in Whitstable?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you fit just one door in Whitstable?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Kent.
What does a Whitstable quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Herne Bay (4 miles)
- Canterbury (6 miles)
- Faversham (7 miles)
- Sittingbourne (12 miles)
- Margate (16 miles)
- Ashford, Kent (16 miles)
Also available in Whitstable
- Stairwell & Escape Route Doors in Whitstable
- FD30S Smoke Control Doorsets in Whitstable
- Fire Door Supply & Fit in Whitstable
- FD60 Fire Doorsets in Whitstable
- School & Healthcare Fire Doors in Whitstable
- Double & Leaf-and-a-Half Fire Doors in Whitstable
- Communal & Corridor Fire Doors in Whitstable
- Fire Exit Doors in Whitstable
- FD90 & FD120 Doorsets across Kent
- All fire doors in Whitstable