Our Mitcham supply and fit service
Fire Rated Doors supplies and fits FD90 and FD120 fire doors in Mitcham, Greater London. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Mitcham is about 7 miles from London. Wherever your building is in CR4, we arrange survey and fitting dates around access and occupancy.
Regulations for FD90 and FD120 fire doors in Greater London
New and replacement fire doors in Mitcham are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD90 and FD120 fire doors cost in Mitcham?
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Mitcham, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Where FD90 and FD120 fire doors are needed
Typical uses for FD90 and FD120 fire doors in Mitcham include high fire-load stores and generator rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Tell us about the doors — photos help
- Free measure survey at your Mitcham property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD90 and FD120 fire doors in Mitcham
Do you cover Mitcham?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Mitcham and the rest of Greater London, including CR4 and nearby Morden.
Which rules do FD90 and FD120 fire doors in Mitcham need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you work for landlords and managing agents in Mitcham?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near Mitcham
- Morden (1 mile)
- Wimbledon (2 miles)
- Streatham (2 miles)
- Carshalton (2 miles)
- Wallington (2 miles)
- Croydon (3 miles)
Other fire doors in Mitcham
- Fire Door Supply & Fit in Mitcham
- Timber Fire Doorsets in Mitcham
- Fire Door Ironmongery & Closers in Mitcham
- Security Fire Doors in Mitcham
- Commercial & Office Fire Doors in Mitcham
- FD30S Smoke Control Doorsets in Mitcham
- Glazed Fire Doors in Mitcham
- Flat Entrance Fire Doors in Mitcham
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Mitcham