Getting FD90 and FD120 fire doors fitted in Wallington
If your fire risk assessment in Wallington has flagged doors to replace, we can schedule, quote and fit FD90 and FD120 steel doorsets for plant and high-risk rooms to match its recommendations. Surveys in SM6 are free and quotes are fixed and itemised.
Wallington is about 10 miles from London. Wherever your building is in SM6, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Wallington
In Wallington, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Wallington?
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Wallington quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Wherever they are in Wallington, FD90 and FD120 fire doors are most often specified for separating walls with long ratings and generator rooms.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
- Transformer and switch rooms
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD90 and FD120 fire doors in Wallington: questions
Can you fit just one door in Wallington?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Greater London.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Wallington.
Do you cover Wallington?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Wallington and the rest of Greater London, including SM6 and nearby Carshalton.
Are FD120 doors always steel?
Most are, though some specialist timber and composite systems hold longer ratings. The evidence for the exact configuration is what counts.
Neighbouring areas
- Carshalton (1 mile)
- Sutton (2 miles)
- South Croydon (2 miles)
- Purley (2 miles)
- Croydon (2 miles)
- Mitcham (2 miles)
Other fire doors in Wallington
- Fire Door Replacement in Wallington
- Stairwell & Escape Route Doors in Wallington
- Acoustic Fire Doors in Wallington
- Riser & Service Cupboard Doors in Wallington
- Composite Fire Doors in Wallington
- FD30S Smoke Control Doorsets in Wallington
- Fire Door Ironmongery & Closers in Wallington
- FD60 Fire Doorsets in Wallington
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Wallington