Certified fire door closers and ironmongery for Mitcham
We cover Mitcham and nearby Morden for fire door closers and ironmongery, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.
We cover CR4 and the surrounding area, including Morden. Tell us your postcode and preferred dates and we'll confirm a survey slot.
Which rules apply in Mitcham?
New and replacement fire doors in Mitcham are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Mitcham
Guide prices for fire door closers and ironmongery in Mitcham run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where fire door closers and ironmongery are needed
Wherever they are in Mitcham, fire door closers and ironmongery are most often specified for busy corridors needing hold-open and failed closers and hinges.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Busy corridors needing hold-open
- Failed closers and hinges
- Seal and signage replacement
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Greater London
Will I get certificates for the doors fitted in Mitcham?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Mitcham free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do fire door closers and ironmongery in Mitcham need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Also covering towns near Mitcham
- Morden (1 mile)
- Wimbledon (2 miles)
- Streatham (2 miles)
- Carshalton (2 miles)
- Wallington (2 miles)
- Croydon (3 miles)
Also available in Mitcham
- Riser & Service Cupboard Doors in Mitcham
- Flat Entrance Fire Doors in Mitcham
- FD30S Smoke Control Doorsets in Mitcham
- Glazed Fire Doors in Mitcham
- Steel Fire Doors in Mitcham
- Composite Fire Doors in Mitcham
- FD60 Fire Doorsets in Mitcham
- Fire Door Supply & Fit in Mitcham
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Mitcham