Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD30SE30 SaSmoke seals

FD30S Smoke Control Doorsets in Mitcham

We supply and fit FD30S fire doors in Mitcham (CR4) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £800 per single doorset in Mitcham, supplied & fitted, ex VAT

Close-up of an intumescent strip and brush smoke seal set into a fire door frame

Certified FD30S fire doors for Mitcham

If your fire risk assessment in Mitcham has flagged doors to replace, we can schedule, quote and fit FD30S smoke control doorsets for flats, stairs and corridors to match its recommendations. Surveys in CR4 are free and quotes are fixed and itemised.

Our Greater London coverage includes Mitcham and its neighbours Morden, Wimbledon and Streatham; tell us your postcode and preferred dates and we'll confirm a survey slot.

Fire door rules in Mitcham

In Mitcham, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD30S fire doors cost in Mitcham?

Our guide price for FD30S fire doors in Mitcham is £800 to £1,250 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.

If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.

Where FD30S fire doors are used in Mitcham

Typical uses for FD30S fire doors in Mitcham include lobby doors in blocks of flats and cross-corridor doors.

London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.

  • Lobby doors in blocks of flats
  • Cross-corridor doors
  • Integral garage doors
  • Protected stairways

Doorset specification

Fire resistance30 minutes (FD30 / E30)
Smoke controlTested to BS 476-31.1 or BS EN 1634-3 (Sa)
SealsCombined intumescent and brush or blade smoke seal
Typical useFlat entrances, protected stairs, corridor doors
CloserOverhead or concealed closer to BS EN 1154
Elevation drawing of fd30s smoke control doorsets

See the full specification and options for FD30S Smoke Control Doorsets

What happens next

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Which rules do FD30S fire doors in Mitcham need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Will I get certificates for the doors fitted in Mitcham?

Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.

How quickly can you survey in Mitcham?

We arrange surveys around your access needs and, where possible, combine Mitcham visits with other work in Greater London. Tell us your preferred dates when you enquire.

What is the difference between FD30 and FD30S?

Both resist fire for 30 minutes. FD30S also has tested smoke seals that limit cold smoke passing around the leaf before the intumescent strip activates.

FD30S Smoke Control Doorsets near Mitcham

More doorsets for Mitcham

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.