FD90 and FD120 fire doors in Camden Town: how we work
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Camden Town and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover NW1 and the surrounding area, including Chalk Farm. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Camden Town
Fire doors in Camden Town sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
What do FD90 and FD120 fire doors cost in Camden Town?
Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Camden Town are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD90 and FD120 fire doors are used in Camden Town
Typical uses for FD90 and FD120 fire doors in Camden Town include transformer and switch rooms and high fire-load stores.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Transformer and switch rooms
- High fire-load stores
- Separating walls with long ratings
- Generator rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Can you work around tenants or staff in Camden Town?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Camden Town.
Is the survey in Camden Town free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How long do they take to make?
Usually several weeks as they are made to order. We confirm lead time on your quote.
Nearby towns we cover
- Chalk Farm (1 mile)
- Holloway (1 mile)
- Islington (2 miles)
- Archway (2 miles)
- Highbury (2 miles)
- Kilburn (2 miles)
Other fire doors in Camden Town
- Stairwell & Escape Route Doors in Camden Town
- Commercial & Office Fire Doors in Camden Town
- HMO Fire Doors in Camden Town
- Double & Leaf-and-a-Half Fire Doors in Camden Town
- FD30 Fire Doorsets in Camden Town
- Fire Door Ironmongery & Closers in Camden Town
- Fire-Rated Screens & Fanlights in Camden Town
- FD30S Smoke Control Doorsets in Camden Town
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Camden Town