Getting FD90 and FD120 fire doors fitted in Barnes
We fit FD90 and FD120 steel doorsets for plant and high-risk rooms in Barnes and the rest of Greater London. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Where possible we combine Barnes surveys with other visits in Greater London, such as Chiswick and Putney, which helps keep survey dates flexible.
Fire door rules in Barnes
In Barnes, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
What do FD90 and FD120 fire doors cost in Barnes?
Our guide price for FD90 and FD120 fire doors in Barnes is £1,900 to £3,800 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Wherever they are in Barnes, FD90 and FD120 fire doors are most often specified for transformer and switch rooms and separating walls with long ratings.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Transformer and switch rooms
- Separating walls with long ratings
- Generator rooms
- High fire-load stores
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Your questions answered
Do you cover Barnes?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Barnes and the rest of Greater London, including SW13 and nearby Chiswick.
What does a Barnes quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
How quickly can you survey in Barnes?
We arrange surveys around your access needs and, where possible, combine Barnes visits with other work in Greater London. Tell us your preferred dates when you enquire.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Nearby towns we cover
- Chiswick (1 mile)
- Putney (2 miles)
- Fulham (2 miles)
- Shepherd's Bush (2 miles)
- Richmond (2 miles)
- Acton (2 miles)
Other fire doors in Barnes
- Fire Door Replacement in Barnes
- FD30S Smoke Control Doorsets in Barnes
- Fire Door Ironmongery & Closers in Barnes
- Security Fire Doors in Barnes
- HMO Fire Doors in Barnes
- Commercial & Office Fire Doors in Barnes
- Communal & Corridor Fire Doors in Barnes
- Double & Leaf-and-a-Half Fire Doors in Barnes
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Barnes