Getting fire door closers and ironmongery fitted in Eltham
Need fire door closers and ironmongery in Eltham? We supply and fit complete certified doorsets across Greater London, starting with a free measure survey in and around SE9. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Where possible we combine Eltham surveys with other visits in Greater London, such as Blackheath and Welling, which helps keep survey dates flexible.
Which rules apply in Eltham?
Because Eltham is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Eltham
Guide prices for fire door closers and ironmongery in Eltham run from about £120 to £500 per item, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Where fire door closers and ironmongery are needed
Typical uses for fire door closers and ironmongery in Eltham include busy corridors needing hold-open and failed closers and hinges.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Busy corridors needing hold-open
- Failed closers and hinges
- Access control preparation
- Seal and signage replacement
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
From enquiry to handover
- Tell us about the doors — photos help
- Free measure survey at your Eltham property
- Door-by-door schedule and fixed price
- Installation and handover pack
Common questions in Greater London
Is the survey in Eltham free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Eltham?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Eltham.
How many hinges does a fire door need?
Most timber fire doors need three hinges; heavier FD60 leaves often need four. The evidence decides.
Also covering towns near Eltham
- Blackheath (2 miles)
- Welling (2 miles)
- Catford (3 miles)
- Greenwich (3 miles)
- Bexley (4 miles)
- Beckenham (4 miles)
Other fire doors in Eltham
- Composite Fire Doors in Eltham
- Fire Exit Doors in Eltham
- Security Fire Doors in Eltham
- FD30S Smoke Control Doorsets in Eltham
- Riser & Service Cupboard Doors in Eltham
- School & Healthcare Fire Doors in Eltham
- Double & Leaf-and-a-Half Fire Doors in Eltham
- Communal & Corridor Fire Doors in Eltham
- Fire Door Ironmongery & Closers across Greater London
- All fire doors in Eltham