FD30 fire doors in Canary Wharf: how we work
Looking for FD30 fire doors in Canary Wharf? Our supply and fit service covers E14 and the surrounding area, including Bow and Canning Town. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Canary Wharf is about 4 miles from London; we cover both, along with Bow, Canning Town and Greenwich.
What the law says in Canary Wharf
New and replacement fire doors in Canary Wharf are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD30 fire doors cost in Canary Wharf?
Our guide price for FD30 fire doors in Canary Wharf is £750 to £1,150 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD30 fire doors are needed
Plant rooms and stores and hotel corridors are among the most common settings for FD30 fire doors, in Canary Wharf as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Plant rooms and stores
- Hotel corridors
- Offices and retail back-of-house
- HMO bedrooms and kitchens
FD30 Fire Doorsets: key specification
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
How it works in Canary Wharf
- Tell us about the doors — photos help
- Free measure survey at your Canary Wharf property
- Door-by-door schedule and fixed price
- Installation and handover pack
Your questions answered
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Canary Wharf.
Is the survey in Canary Wharf free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Can you work around tenants or staff in Canary Wharf?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD30 door?
Most FD30 timber leaves are 44mm thick. FD60 leaves are typically 54mm.
Also covering towns near Canary Wharf
- Bow (1 mile)
- Canning Town (2 miles)
- Greenwich (2 miles)
- Stratford (2 miles)
- Peckham (3 miles)
- Blackheath (3 miles)
Also available in Canary Wharf
- Stairwell & Escape Route Doors in Canary Wharf
- Fire Doors for Homes in Canary Wharf
- Steel Fire Doors in Canary Wharf
- FD60 Fire Doorsets in Canary Wharf
- Timber Fire Doorsets in Canary Wharf
- Flat Entrance Fire Doors in Canary Wharf
- HMO Fire Doors in Canary Wharf
- Fire-Rated Screens & Fanlights in Canary Wharf
- FD30 Fire Doorsets across Greater London
- All fire doors in Canary Wharf