FD90 and FD120 fire doors in Acton: how we work
Looking for FD90 and FD120 fire doors in Acton? Our supply and fit service covers W3 and the surrounding area, including Chiswick and Shepherd's Bush. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Our Greater London coverage includes Acton and its neighbours Chiswick, Shepherd's Bush and Willesden; tell us your postcode and preferred dates and we'll confirm a survey slot.
Fire door rules in Acton
New and replacement fire doors in Acton are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Acton
Expect roughly £1,900–£3,800 per single doorset for FD90 and FD120 fire doors, fitted, ex VAT. Your Acton quote is fixed after survey and itemised door by door.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Where FD90 and FD120 fire doors are needed
Typical uses for FD90 and FD120 fire doors in Acton include generator rooms and separating walls with long ratings.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Generator rooms
- Separating walls with long ratings
- Transformer and switch rooms
- High fire-load stores
FD90 & FD120 Doorsets: key specification
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Common questions in Greater London
Do you cover Acton?
Yes. We survey, supply and fit FD90 and FD120 fire doors throughout Acton and the rest of Greater London, including W3 and nearby Chiswick.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Acton.
Can you work around tenants or staff in Acton?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Also covering towns near Acton
- Chiswick (1 mile)
- Shepherd's Bush (2 miles)
- Willesden (2 miles)
- Barnes (2 miles)
- Notting Hill (3 miles)
- Wembley (3 miles)
More doorsets for Acton
- School & Healthcare Fire Doors in Acton
- Stairwell & Escape Route Doors in Acton
- FD30 Fire Doorsets in Acton
- FD30S Smoke Control Doorsets in Acton
- Fire Exit Doors in Acton
- Composite Fire Doors in Acton
- Steel Fire Doors in Acton
- Riser & Service Cupboard Doors in Acton
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Acton