Getting FD90 and FD120 fire doors fitted in Dagenham
Getting FD90 and FD120 fire doors right in Dagenham means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Where possible we combine Dagenham surveys with other visits in Greater London, such as Becontree and Romford, which helps keep survey dates flexible.
Fire door rules in Dagenham
New and replacement fire doors in Dagenham are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
Guide prices in Dagenham
Guide prices for FD90 and FD120 fire doors in Dagenham run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Central and inner London work can cost a little more where parking, loading restrictions or out-of-hours access apply; we show any access costs as a separate line.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Dagenham
Transformer and switch rooms and high fire-load stores are among the most common settings for FD90 and FD120 fire doors, in Dagenham as elsewhere.
London has the UK's largest concentration of purpose-built flats and high-rise residential blocks, so flat entrance doors, communal corridor doors and regulation 10 checks drive much of the demand.
- Transformer and switch rooms
- High fire-load stores
- Generator rooms
- Separating walls with long ratings
What's in the doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
Questions about FD90 and FD120 fire doors in Dagenham
How quickly can you survey in Dagenham?
We arrange surveys around your access needs and, where possible, combine Dagenham visits with other work in Greater London. Tell us your preferred dates when you enquire.
Is the survey in Dagenham free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do FD90 and FD120 fire doors in Dagenham need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Also covering towns near Dagenham
- Becontree (2 miles)
- Romford (2 miles)
- Hornchurch (2 miles)
- Barking (4 miles)
- Thamesmead (4 miles)
- Ilford (4 miles)
Also available in Dagenham
- Fire Door Supply & Fit in Dagenham
- School & Healthcare Fire Doors in Dagenham
- Security Fire Doors in Dagenham
- Steel Fire Doors in Dagenham
- Flat Entrance Fire Doors in Dagenham
- Double & Leaf-and-a-Half Fire Doors in Dagenham
- Commercial & Office Fire Doors in Dagenham
- Fire Exit Doors in Dagenham
- FD90 & FD120 Doorsets across Greater London
- All fire doors in Dagenham