Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD90FD120Steel

FD90 & FD120 Doorsets in Llanelli

We supply and fit FD90 and FD120 fire doors in Llanelli (SA15) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £1,900 per single doorset in Llanelli, supplied & fitted, ex VAT

Grey steel double doorset in a plant room corridor

Our Llanelli supply and fit service

Looking for FD90 and FD120 fire doors in Llanelli? Our supply and fit service covers SA15 and the surrounding area, including Gorseinon and Swansea. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.

Llanelli is one of the main towns we cover in Dyfed; tell us your dates and we'll arrange a survey.

Regulations for FD90 and FD120 fire doors in Dyfed

Wales issues its own version of Approved Document B, so new and replacement fire doors in Llanelli are specified against the Welsh guidance. The Regulatory Reform (Fire Safety) Order 2005 applies in Wales, covering workplaces and the common parts of multi-occupied residential buildings, including flat entrance doors.

Cost of FD90 and FD120 fire doors in Dyfed

Our guide for FD90 and FD120 fire doors is £1,900–£3,800 per single doorset fitted, ex VAT. Quotes for Llanelli are fixed once we've measured, and include removing and disposing of old doors where they're being replaced.

Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.

Typical uses in Llanelli

High fire-load stores and generator rooms are among the most common settings for FD90 and FD120 fire doors, in Llanelli as elsewhere.

West Wales demand comes from Llanelli's town centre and industry, university housing and coastal hotels and guest houses.

  • High fire-load stores
  • Generator rooms
  • Separating walls with long ratings
  • Transformer and switch rooms

FD90 & FD120 Doorsets: key specification

Fire resistance90 or 120 minutes (E90 / E120, EI where specified)
ConstructionUsually steel; some specialist timber systems
Typical usePlant rooms, transformer rooms, high-fire-load stores
ConfigurationsSingle, double, with or without vision panels
HardwareSteel-specific hinges, closers, panic hardware where needed
Elevation drawing of fd90 & fd120 doorsets

See the full specification and options for FD90 & FD120 Doorsets

What happens next

  1. Tell us about the doors — photos help
  2. Free measure survey at your Llanelli property
  3. Door-by-door schedule and fixed price
  4. Installation and handover pack

Questions about FD90 and FD120 fire doors in Llanelli

Can you work around tenants or staff in Llanelli?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you remove the old doors?

Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Llanelli.

Which rules do FD90 and FD120 fire doors in Llanelli need to meet?

They are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

How long do they take to make?

Usually several weeks as they are made to order. We confirm lead time on your quote.

Also covering towns near Llanelli

Other products in Llanelli

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.