FD90 & FD120 Doorsets for Swansea buildings
Getting FD90 and FD120 fire doors right in Swansea means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
We cover Swansea and the rest of West Glamorgan, with surveys arranged around your building's access and occupancy.
Fire door rules in Swansea
In Swansea the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
Guide prices in Swansea
Budget around £1,900 to £3,800 per single doorset for FD90 and FD120 fire doors supplied and fitted in Swansea, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
If your fire risk assessment lists specific doors, send it with your enquiry and we'll price exactly those openings.
Typical uses in Swansea
Typical uses for FD90 and FD120 fire doors in Swansea include high fire-load stores and transformer and switch rooms.
Swansea's city-centre flats, university buildings and the industrial towns of Neath and Port Talbot make up much of West Glamorgan's work.
- High fire-load stores
- Transformer and switch rooms
- Generator rooms
- Separating walls with long ratings
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD90 and FD120 fire doors in Swansea: questions
Which rules do FD90 and FD120 fire doors in Swansea need to meet?
They are specified to Approved Document B (Wales) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Will I get certificates for the doors fitted in Swansea?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Swansea free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do these doors need panic hardware?
Only where they are on an escape route and the fire strategy calls for it. Panic hardware must be tested with the doorset.
Nearby towns we cover
- Briton Ferry (6 miles)
- Gorseinon (6 miles)
- Neath (7 miles)
- Llanelli (11 miles)
- Ammanford (12 miles)
- Maesteg (12 miles)
Other fire doors in Swansea
- Commercial & Office Fire Doors in Swansea
- Fire-Rated Screens & Fanlights in Swansea
- Security Fire Doors in Swansea
- Stairwell & Escape Route Doors in Swansea
- Composite Fire Doors in Swansea
- Fire Exit Doors in Swansea
- Communal & Corridor Fire Doors in Swansea
- HMO Fire Doors in Swansea
- FD90 & FD120 Doorsets across West Glamorgan
- All fire doors in Swansea