Getting FD90 and FD120 fire doors fitted in Briton Ferry
Looking for FD90 and FD120 fire doors in Briton Ferry? Our supply and fit service covers SA12 and the surrounding area, including Neath and Swansea. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Whether your building is in central Briton Ferry or on its edges towards Neath, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Briton Ferry
In Briton Ferry the specification follows Approved Document B as published for Wales, while day-to-day duties to keep fire doors working come from the Regulatory Reform (Fire Safety) Order 2005. The England-only door-check regulations of 2022 don't apply in Wales, but regular checks remain good practice and are expected by fire risk assessors.
Cost of FD90 and FD120 fire doors in West Glamorgan
Guide prices for FD90 and FD120 fire doors in Briton Ferry run from about £1,900 to £3,800 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Briton Ferry
In Briton Ferry, FD90 and FD120 fire doors are typically needed in generator rooms and separating walls with long ratings.
Swansea's city-centre flats, university buildings and the industrial towns of Neath and Port Talbot make up much of West Glamorgan's work.
- Generator rooms
- Separating walls with long ratings
- High fire-load stores
- Transformer and switch rooms
What you get with each doorset
| Fire resistance | 90 or 120 minutes (E90 / E120, EI where specified) |
|---|---|
| Construction | Usually steel; some specialist timber systems |
| Typical use | Plant rooms, transformer rooms, high-fire-load stores |
| Configurations | Single, double, with or without vision panels |
| Hardware | Steel-specific hinges, closers, panic hardware where needed |
See the full specification and options for FD90 & FD120 Doorsets
What happens next
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
Your questions answered
Will I get certificates for the doors fitted in Briton Ferry?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
What does a Briton Ferry quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Briton Ferry.
Can FD120 doors have glass?
Yes, with insulating fire glass tested in that doorset, but panel size is usually limited.
Neighbouring areas
- Neath (2 miles)
- Swansea (6 miles)
- Maesteg (7 miles)
- Gorseinon (10 miles)
- Ammanford (13 miles)
- Bridgend (14 miles)
Other products in Briton Ferry
- Fire Door Supply & Fit in Briton Ferry
- Communal & Corridor Fire Doors in Briton Ferry
- FD30 Fire Doorsets in Briton Ferry
- Security Fire Doors in Briton Ferry
- Steel Fire Doors in Briton Ferry
- School & Healthcare Fire Doors in Briton Ferry
- Stairwell & Escape Route Doors in Briton Ferry
- Riser & Service Cupboard Doors in Briton Ferry
- FD90 & FD120 Doorsets across West Glamorgan
- All fire doors in Briton Ferry