FD60 fire doors in Tynemouth: how we work
Looking for FD60 fire doors in Tynemouth? Our supply and fit service covers NE30 and the surrounding area, including North Shields and South Shields. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Tynemouth is about 8 miles from Newcastle upon Tyne. Wherever your building is in NE30, we arrange survey and fitting dates around access and occupancy.
Fire door rules in Tynemouth
Because Tynemouth is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
FD60 fire doors prices in Tynemouth
Our guide price for FD60 fire doors in Tynemouth is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD60 fire doors are used in Tynemouth
Typical uses for FD60 fire doors in Tynemouth include higher-risk stores and plant and boiler rooms.
Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.
- Higher-risk stores
- Plant and boiler rooms
- Compartment walls
- Stair cores in taller blocks
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD60 fire doors in Tynemouth: questions
Is the survey in Tynemouth free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Tynemouth?
Yes. We survey, supply and fit FD60 fire doors throughout Tynemouth and the rest of Tyne and Wear, including NE30 and nearby North Shields.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Tynemouth.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Tynemouth
- North Shields (1 mile)
- South Shields (1 mile)
- Whitley Bay (2 miles)
- Jarrow (4 miles)
- Wallsend (5 miles)
- Hebburn (5 miles)
Also available in Tynemouth
- FD90 & FD120 Doorsets in Tynemouth
- HMO Fire Doors in Tynemouth
- Timber Fire Doorsets in Tynemouth
- Stairwell & Escape Route Doors in Tynemouth
- FD30S Smoke Control Doorsets in Tynemouth
- Acoustic Fire Doors in Tynemouth
- Steel Fire Doors in Tynemouth
- Commercial & Office Fire Doors in Tynemouth
- FD60 Fire Doorsets across Tyne and Wear
- All fire doors in Tynemouth