Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in North Shields

We supply and fit FD60 fire doors in North Shields (NE30) as complete certified doorsets — with a free measure survey, a fixed itemised quote listing every certificate reference, and installation exactly as tested.

From £1,050 per single doorset in North Shields, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Certified FD60 fire doors for North Shields

We cover North Shields and nearby Tynemouth for FD60 fire doors, with surveys booked around your building's access and occupancy. Each door is quoted individually, so you can see what every opening costs and why.

Whether your building is in central North Shields or on its edges towards Tynemouth, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.

What the law says in North Shields

In North Shields, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

Cost of FD60 fire doors in Tyne and Wear

Guide prices for FD60 fire doors in North Shields run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.

Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.

Buildings that need FD60 fire doors

In North Shields, FD60 fire doors are typically needed in higher-risk stores and compartment walls.

Newcastle and Sunderland combine city-centre apartments and student housing with a large stock of post-war council blocks and terraces.

  • Higher-risk stores
  • Compartment walls
  • Plant and boiler rooms
  • Stair cores in taller blocks

What you get with each doorset

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

What happens next

  1. Send your postcode, door count and any fire risk assessment notes
  2. We survey and measure each opening for free
  3. You get a fixed, itemised quote with certificate references
  4. We fit, test operation and hand over the paperwork

Common questions in Tyne and Wear

Can you work around tenants or staff in North Shields?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

Do you cover North Shields?

Yes. We survey, supply and fit FD60 fire doors throughout North Shields and the rest of Tyne and Wear, including NE30 and nearby Tynemouth.

Which rules do FD60 fire doors in North Shields need to meet?

They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.

Is there an FD60S?

Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.

Nearby towns we cover

Also available in North Shields

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.