Certified FD60 fire doors for Oakham
Fire Rated Doors supplies and fits FD60 fire doors in Oakham, Rutland. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Surveys in Oakham are booked around your access needs, and we cover the wider Rutland area too.
What the law says in Oakham
Fire doors in Oakham sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD60 fire doors in Rutland
Our guide price for FD60 fire doors in Oakham is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Each quote covers the certified doorset, standard ironmongery, fitting, removal of the old door and a handover record; anything outside that scope is shown as a separate line before you accept.
Typical uses in Oakham
Compartment walls and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Oakham as elsewhere.
Rutland is England's smallest historic county, with demand mostly from Oakham's schools, care homes, hotels and converted period buildings.
- Compartment walls
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Oakham
- Tell us about the doors — photos help
- Free measure survey at your Oakham property
- Door-by-door schedule and fixed price
- Installation and handover pack
Questions about FD60 fire doors in Oakham
Can you fit just one door in Oakham?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Rutland.
What does a Oakham quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Will I get certificates for the doors fitted in Oakham?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Oakham
- Melton Mowbray (9 miles)
- Stamford (11 miles)
- Corby (12 miles)
- Market Harborough (16 miles)
- Oadby (16 miles)
- Wigston (16 miles)
Other fire doors in Oakham
- Fire Exit Doors in Oakham
- Steel Fire Doors in Oakham
- HMO Fire Doors in Oakham
- Double & Leaf-and-a-Half Fire Doors in Oakham
- FD30S Smoke Control Doorsets in Oakham
- Commercial & Office Fire Doors in Oakham
- Acoustic Fire Doors in Oakham
- Stairwell & Escape Route Doors in Oakham
- FD60 Fire Doorsets across Rutland
- All fire doors in Oakham