Certified FD60 fire doors for Corby
Looking for FD60 fire doors in Corby? Our supply and fit service covers NN17 and the surrounding area, including Kettering and Market Harborough. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
We cover NN17 and the surrounding area, including Kettering. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Corby
In Corby, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD60 fire doors in Northamptonshire
Guide prices for FD60 fire doors in Corby run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Where FD60 fire doors are used in Corby
Compartment walls and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Corby as elsewhere.
Northamptonshire has a large logistics and warehouse sector, alongside Northampton's town-centre flats and growing new towns.
- Compartment walls
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Corby
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Corby.
Do you cover Corby?
Yes. We survey, supply and fit FD60 fire doors throughout Corby and the rest of Northamptonshire, including NN17 and nearby Kettering.
How quickly can you survey in Corby?
We arrange surveys around your access needs and, where possible, combine Corby visits with other work in Northamptonshire. Tell us your preferred dates when you enquire.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
Neighbouring areas
- Kettering (7 miles)
- Market Harborough (10 miles)
- Oakham (12 miles)
- Wellingborough (14 miles)
- Stamford (14 miles)
- Rushden (15 miles)
Also available in Corby
- FD30S Smoke Control Doorsets in Corby
- Fire Door Ironmongery & Closers in Corby
- Acoustic Fire Doors in Corby
- Fire-Rated Screens & Fanlights in Corby
- Flat Entrance Fire Doors in Corby
- FD30 Fire Doorsets in Corby
- Fire Doors for Homes in Corby
- Timber Fire Doorsets in Corby
- FD60 Fire Doorsets across Northamptonshire
- All fire doors in Corby