Getting FD60 fire doors fitted in Darlington
If your fire risk assessment in Darlington has flagged doors to replace, we can schedule, quote and fit FD60 doorsets for compartment walls, cores and plant rooms to match its recommendations. Surveys in DL1 are free and quotes are fixed and itemised.
We cover Darlington and the rest of County Durham, with surveys arranged around your building's access and occupancy.
Which rules apply in Darlington?
New and replacement fire doors in Darlington are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Darlington?
Expect roughly £1,050–£1,650 per single doorset for FD60 fire doors, fitted, ex VAT. Your Darlington quote is fixed after survey and itemised door by door.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Typical uses in Darlington
Plant and boiler rooms and stair cores in taller blocks are among the most common settings for FD60 fire doors, in Darlington as elsewhere.
County Durham and the Tees side include former industrial towns, terraced housing, student accommodation in Durham and large public estates.
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
- Compartment walls
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
How it works in Darlington
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Darlington: questions
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Darlington.
Will I get certificates for the doors fitted in Darlington?
Every doorset is listed in your handover pack with the manufacturer's certificate reference, plus an installation record and photos.
Is the survey in Darlington free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Darlington
- Newton Aycliffe (7 miles)
- Stockton-on-Tees (10 miles)
- Thornaby-on-Tees (10 miles)
- Bishop Auckland (11 miles)
- Billingham (11 miles)
- Middlesbrough (13 miles)
Other products in Darlington
- Commercial & Office Fire Doors in Darlington
- Steel Fire Doors in Darlington
- Security Fire Doors in Darlington
- Glazed Fire Doors in Darlington
- Double & Leaf-and-a-Half Fire Doors in Darlington
- Timber Fire Doorsets in Darlington
- Riser & Service Cupboard Doors in Darlington
- Fire Exit Doors in Darlington
- FD60 Fire Doorsets across County Durham
- All fire doors in Darlington