FD60 Fire Doorsets for Speke buildings
Looking for FD60 fire doors in Speke? Our supply and fit service covers L24 and the surrounding area, including Halewood and Garston. We quote complete doorsets — leaf, frame, seals, hinges and closer — because that is what the fire certification actually covers.
Speke is about 7 miles from Liverpool; we cover both, along with Halewood, Garston and Runcorn.
What the law says in Speke
Because Speke is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Guide prices in Speke
Our guide price for FD60 fire doors in Speke is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
The biggest price drivers are leaf size, glazing, finish and ironmongery; upper floors without lifts and restricted parking can also affect fitting cost.
Typical uses in Speke
Wherever they are in Speke, FD60 fire doors are most often specified for compartment walls and stair cores in taller blocks.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Compartment walls
- Stair cores in taller blocks
- Plant and boiler rooms
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
From enquiry to handover
- Request a quote online or call
- Survey: sizes, ratings, hardware and condition
- Quote with each doorset's certification
- Phased fitting and handover records
FD60 fire doors in Speke: questions
Is the survey in Speke free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Do you cover Speke?
Yes. We survey, supply and fit FD60 fire doors throughout Speke and the rest of Merseyside, including L24 and nearby Halewood.
What does a Speke quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Do FD60 doors need different closers?
Often a stronger closer, sized to the heavier leaf, still keeping opening forces within Approved Document M limits where accessibility applies.
Also covering towns near Speke
- Halewood (1 mile)
- Garston (2 miles)
- Runcorn (4 miles)
- Widnes (4 miles)
- Huyton (5 miles)
- Ellesmere Port (5 miles)