Certified FD60 fire doors for Halewood
Getting FD60 fire doors right in Halewood means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Whether your building is in central Halewood or on its edges towards Speke, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Fire door rules in Halewood
Fire doors in Halewood sit under English rules: Approved Document B sets what goes in, the Regulatory Reform (Fire Safety) Order 2005 covers keeping doors effective in non-domestic premises and shared parts of residential buildings, and the 2022 regulations require regular door checks in residential buildings taller than 11 metres. Higher-risk buildings — 18 metres or seven storeys with two or more homes — also come under the Building Safety Act 2022.
Cost of FD60 fire doors in Merseyside
Our guide price for FD60 fire doors in Halewood is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Halewood
Typical uses for FD60 fire doors in Halewood include compartment walls and stair cores in taller blocks.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Compartment walls
- Stair cores in taller blocks
- Higher-risk stores
- Plant and boiler rooms
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
FD60 fire doors in Halewood: questions
Do you work for landlords and managing agents in Halewood?
Yes. We can schedule doors flat by flat, send quotes per property and invoice the managing agent or freeholder.
Can you work around tenants or staff in Halewood?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Which rules do FD60 fire doors in Halewood need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Nearby towns we cover
Other fire doors in Halewood
- Composite Fire Doors in Halewood
- Glazed Fire Doors in Halewood
- Security Fire Doors in Halewood
- Fire Door Replacement in Halewood
- Fire-Rated Screens & Fanlights in Halewood
- Riser & Service Cupboard Doors in Halewood
- Communal & Corridor Fire Doors in Halewood
- Acoustic Fire Doors in Halewood
- FD60 Fire Doorsets across Merseyside
- All fire doors in Halewood