FD60 Fire Doorsets for Garston buildings
For landlords, managing agents, businesses and homeowners in Garston, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.
Whether your building is in central Garston or on its edges towards Speke, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
What the law says in Garston
New and replacement fire doors in Garston are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Garston?
Guide prices for FD60 fire doors in Garston run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are used in Garston
Typical uses for FD60 fire doors in Garston include higher-risk stores and plant and boiler rooms.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Higher-risk stores
- Plant and boiler rooms
- Stair cores in taller blocks
- Compartment walls
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Merseyside
What does a Garston quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you work around tenants or staff in Garston?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How quickly can you survey in Garston?
We arrange surveys around your access needs and, where possible, combine Garston visits with other work in Merseyside. Tell us your preferred dates when you enquire.
Is there an FD60S?
Yes. FD60S doorsets have tested smoke seals as well as 60 minutes of fire resistance.
Also covering towns near Garston
- Speke (2 miles)
- Halewood (3 miles)
- Ellesmere Port (4 miles)
- Bebington (5 miles)
- Huyton (6 miles)
- Liverpool (6 miles)
Also available in Garston
- FD30 Fire Doorsets in Garston
- Communal & Corridor Fire Doors in Garston
- Steel Fire Doors in Garston
- Commercial & Office Fire Doors in Garston
- School & Healthcare Fire Doors in Garston
- Fire Door Supply & Fit in Garston
- Glazed Fire Doors in Garston
- Fire Doors for Homes in Garston
- FD60 Fire Doorsets across Merseyside
- All fire doors in Garston