Certified FD30S fire doors for Speke
Fire Rated Doors supplies and fits FD30S fire doors in Speke, Merseyside. Whether it's a single replacement or every door in a block, we start by surveying the openings and end with a handover pack listing each doorset and its certificate reference.
Speke is about 7 miles from Liverpool. Wherever your building is in L24, we arrange survey and fitting dates around access and occupancy.
What the law says in Speke
New and replacement fire doors in Speke are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
FD30S fire doors prices in Speke
Guide prices for FD30S fire doors in Speke run from about £800 to £1,250 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Buildings that need FD30S fire doors
Cross-corridor doors and lobby doors in blocks of flats are among the most common settings for FD30S fire doors, in Speke as elsewhere.
Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.
- Cross-corridor doors
- Lobby doors in blocks of flats
- Protected stairways
- Integral garage doors
FD30S Smoke Control Doorsets: key specification
| Fire resistance | 30 minutes (FD30 / E30) |
|---|---|
| Smoke control | Tested to BS 476-31.1 or BS EN 1634-3 (Sa) |
| Seals | Combined intumescent and brush or blade smoke seal |
| Typical use | Flat entrances, protected stairs, corridor doors |
| Closer | Overhead or concealed closer to BS EN 1154 |
See the full specification and options for FD30S Smoke Control Doorsets
How it works in Speke
- Share your FRA or inspection findings
- We confirm every door on site
- Fixed quote, certified doorsets only
- Fitted to the manufacturer's instructions, with photos
FD30S fire doors in Speke: questions
What does a Speke quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can you fit just one door in Speke?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Merseyside.
Can you work around tenants or staff in Speke?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
Is a threshold seal needed?
It depends on the doorset's test evidence. Some FD30S doorsets need a drop-down or threshold seal; others control smoke with a set threshold gap.
FD30S Smoke Control Doorsets near Speke
- Halewood (1 mile)
- Garston (2 miles)
- Runcorn (4 miles)
- Widnes (4 miles)
- Huyton (5 miles)
- Ellesmere Port (5 miles)
More doorsets for Speke
- Commercial & Office Fire Doors in Speke
- HMO Fire Doors in Speke
- Fire Door Replacement in Speke
- Fire Doors for Homes in Speke
- Steel Fire Doors in Speke
- Riser & Service Cupboard Doors in Speke
- Fire Door Supply & Fit in Speke
- Glazed Fire Doors in Speke
- FD30S Smoke Control Doorsets across Merseyside
- All fire doors in Speke