FD60 fire doors in Ellesmere Port: how we work
Need FD60 fire doors in Ellesmere Port? We supply and fit complete certified doorsets across Cheshire, starting with a free measure survey in and around CH65. Every quote lists each door, its rating and the manufacturer's certificate reference, so you know exactly what is going in before anything is ordered.
Ellesmere Port is about 16 miles from Warrington. Wherever your building is in CH65, we arrange survey and fitting dates around access and occupancy.
Regulations for FD60 fire doors in Cheshire
New and replacement fire doors in Ellesmere Port are specified under the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks of flats, the Regulatory Reform (Fire Safety) Order 2005 makes the responsible person keep fire doors in working order, and in residential buildings with a storey above 11 metres regulation 10 of the Fire Safety (England) Regulations 2022 adds quarterly checks of communal doors and annual checks of flat entrance doors.
What do FD60 fire doors cost in Ellesmere Port?
Our guide price for FD60 fire doors in Ellesmere Port is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.
Guide prices assume straightforward access; out-of-hours working or difficult access is priced as a separate, visible line.
Where FD60 fire doors are needed
Stair cores in taller blocks and plant and boiler rooms are among the most common settings for FD60 fire doors, in Ellesmere Port as elsewhere.
Cheshire spans Warrington's warehouses and offices, Chester's historic centre and the new-build estates around Crewe.
- Stair cores in taller blocks
- Plant and boiler rooms
- Compartment walls
- Higher-risk stores
Doorset specification
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
What happens next
- Tell us about the doors — photos help
- Free measure survey at your Ellesmere Port property
- Door-by-door schedule and fixed price
- Installation and handover pack
Your questions answered
Can you fit just one door in Ellesmere Port?
Yes — from a single door to a full building. Where possible, small jobs are scheduled alongside other visits in Cheshire.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Ellesmere Port.
Can you work around tenants or staff in Ellesmere Port?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How thick is an FD60 door?
Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.
FD60 Fire Doorsets near Ellesmere Port
- Garston (4 miles)
- Speke (5 miles)
- Chester (6 miles)
- Halewood (6 miles)
- Bebington (7 miles)
- Deeside (8 miles)
More doorsets for Ellesmere Port
- FD30S Smoke Control Doorsets in Ellesmere Port
- Security Fire Doors in Ellesmere Port
- Communal & Corridor Fire Doors in Ellesmere Port
- Commercial & Office Fire Doors in Ellesmere Port
- School & Healthcare Fire Doors in Ellesmere Port
- Double & Leaf-and-a-Half Fire Doors in Ellesmere Port
- FD30 Fire Doorsets in Ellesmere Port
- Fire Door Ironmongery & Closers in Ellesmere Port
- FD60 Fire Doorsets across Cheshire
- All fire doors in Ellesmere Port