Complete certified doorsetsFree measure surveyEngland, Wales, Scotland & NI
Call 0800 088 6248
Fire Rated Doors
FD60E60 / EI6054mm leaf

FD60 Fire Doorsets in Liverpool

We supply and fit FD60 fire doors in Liverpool (L3) as complete certified doorsets — from free survey to fixed quote, certified doorset and documented installation, all under one price.

From £1,050 per single doorset in Liverpool, supplied & fitted, ex VAT

Oak-veneered fire doorset pair with vision panel beside a concrete stair

Getting FD60 fire doors fitted in Liverpool

For landlords, managing agents, businesses and homeowners in Liverpool, we provide FD60 doorsets for compartment walls, cores and plant rooms with one fixed quote. A free survey comes first, then a door-by-door schedule, then installation to the manufacturer's instructions and a handover pack for your records.

Liverpool is one of the main towns we cover in Merseyside; tell us your dates and we'll arrange a survey.

What the law says in Liverpool

In Liverpool, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.

What do FD60 fire doors cost in Liverpool?

Our guide price for FD60 fire doors in Liverpool is £1,050 to £1,650 per single doorset including fitting, ex VAT. Non-standard sizes, veneers, vision panels and access control push towards the top of the range.

We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.

Where FD60 fire doors are used in Liverpool

In Liverpool, FD60 fire doors are typically needed in compartment walls and higher-risk stores.

Liverpool's large stock of city-centre apartments and student blocks is matched by Victorian conversions across Wirral, Sefton and St Helens.

  • Compartment walls
  • Higher-risk stores
  • Plant and boiler rooms
  • Stair cores in taller blocks

FD60 Fire Doorsets: key specification

Fire resistance60 minutes integrity (FD60 / E60); EI60 where specified
Typical leaf54mm timber or steel
Smoke controlFD60S available with tested smoke seals
Typical useCompartment walls, firefighting shafts, plant rooms
HingesUsually four hinges on timber leaves, per test evidence
Elevation drawing of fd60 fire doorsets

See the full specification and options for FD60 Fire Doorsets

How it works in Liverpool

  1. Request a quote online or call
  2. Survey: sizes, ratings, hardware and condition
  3. Quote with each doorset's certification
  4. Phased fitting and handover records

Your questions answered

Is the survey in Liverpool free?

Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.

Can you work around tenants or staff in Liverpool?

Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.

What does a Liverpool quote include?

Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.

How thick is an FD60 door?

Typically 54mm for timber doorsets. Steel FD60 doors vary by manufacturer.

FD60 Fire Doorsets near Liverpool

Other products in Liverpool

Get a fixed quote for your fire doors

Free measure survey. Certificate reference against every doorset.