Our Grays supply and fit service
We fit FD60 doorsets for compartment walls, cores and plant rooms in Grays and the rest of Essex. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
Whether your building is in central Grays or on its edges towards South Ockendon, survey and fitting dates are arranged around your access needs, with occupied buildings worked in planned phases.
Regulations for FD60 fire doors in Essex
Because Grays is in England, the starting point is Approved Document B for the specification and the Fire Safety Order 2005 for ongoing duties. Blocks with a storey above 11 metres also fall under regulation 10 of the Fire Safety (England) Regulations 2022: communal fire doors checked at least every three months, flat front doors at least every year.
Cost of FD60 fire doors in Essex
Guide prices for FD60 fire doors in Grays run from about £1,050 to £1,650 per single doorset, supplied and fitted, ex VAT. Size, glazing, finish and ironmongery move the price, and the survey quote is fixed.
Made-to-measure sizes for older openings, vision panels and upgraded hardware are the usual reasons a door sits towards the top of the range.
Typical uses in Grays
Wherever they are in Grays, FD60 fire doors are most often specified for compartment walls and plant and boiler rooms.
Essex covers commuter towns, new estates and large town-centre flat developments, from Southend and Basildon to Chelmsford and Colchester.
- Compartment walls
- Plant and boiler rooms
- Stair cores in taller blocks
- Higher-risk stores
What you get with each doorset
| Fire resistance | 60 minutes integrity (FD60 / E60); EI60 where specified |
|---|---|
| Typical leaf | 54mm timber or steel |
| Smoke control | FD60S available with tested smoke seals |
| Typical use | Compartment walls, firefighting shafts, plant rooms |
| Hinges | Usually four hinges on timber leaves, per test evidence |
See the full specification and options for FD60 Fire Doorsets
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about FD60 fire doors in Grays
Is the survey in Grays free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
Which rules do FD60 fire doors in Grays need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Do you remove the old doors?
Yes. Removal and disposal of the old door and frame is included when we replace a doorset in Grays.
Can I use an FD60 door where FD30 is required?
Yes — a higher rating meets a lower requirement — but it is heavier and dearer, so we only recommend it where the location calls for it or you want a margin.
Also covering towns near Grays
- South Ockendon (3 miles)
- Gravesend (3 miles)
- Dartford (5 miles)
- Stanford-le-Hope (6 miles)
- Hornchurch (7 miles)
- Bexley (8 miles)
More doorsets for Grays
- Acoustic Fire Doors in Grays
- Composite Fire Doors in Grays
- Stairwell & Escape Route Doors in Grays
- Flat Entrance Fire Doors in Grays
- Steel Fire Doors in Grays
- Double & Leaf-and-a-Half Fire Doors in Grays
- Fire Door Supply & Fit in Grays
- Glazed Fire Doors in Grays
- FD60 Fire Doorsets across Essex
- All fire doors in Grays