Fire Door Ironmongery & Closers for Swanley buildings
Getting fire door closers and ironmongery right in Swanley means choosing a certified doorset for each opening and fitting it exactly as tested. That's the whole service: survey, schedule, certified doorset, careful installation and the paperwork to prove it.
Swanley is about 17 miles from Maidstone. Wherever your building is in BR8, we arrange survey and fitting dates around access and occupancy.
Regulations for fire door closers and ironmongery in Kent
In Swanley, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Fire door closers and ironmongery prices in Swanley
Budget around £120 to £500 per item for fire door closers and ironmongery supplied and fitted in Swanley, excluding VAT. We price each opening separately so nothing is hidden in a lump sum.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Typical uses in Swanley
Seal and signage replacement and failed closers and hinges are among the most common settings for fire door closers and ironmongery, in Swanley as elsewhere.
Kent's Medway towns, county town of Maidstone and coastal resorts bring a mix of flats, HMOs, hotels and converted seaside buildings.
- Seal and signage replacement
- Failed closers and hinges
- Busy corridors needing hold-open
- Access control preparation
What's in the doorset
| Closers | Overhead and concealed closers to BS EN 1154 |
|---|---|
| Hinges | CE/UKCA-marked butt hinges to BS EN 1935 |
| Hold-open | Electromagnetic and free-swing devices to BS EN 1155 |
| Locks & latches | To BS EN 12209, tested with the doorset |
| Seals & signs | Intumescent and smoke seals; mandatory fire door signage |
See the full specification and options for Fire Door Ironmongery & Closers
Four steps to compliant doors
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Questions about fire door closers and ironmongery in Swanley
How quickly can you survey in Swanley?
We arrange surveys around your access needs and, where possible, combine Swanley visits with other work in Kent. Tell us your preferred dates when you enquire.
Which rules do fire door closers and ironmongery in Swanley need to meet?
They are specified to Approved Document B (England) and your fire risk assessment or fire strategy. We confirm the rating of each door at survey.
Is the survey in Swanley free?
Yes. We measure and schedule your doors at no cost and send a fixed, itemised quote.
What closer strength does a fire door need?
Enough to close and latch the door reliably — often EN3 or EN4 for standard leaves — while keeping opening force within accessibility limits.
Fire Door Ironmongery & Closers near Swanley
- Bexley (3 miles)
- Dartford (4 miles)
- Welling (6 miles)
- Eltham (6 miles)
- Thamesmead (7 miles)
- Grays (9 miles)
Other products in Swanley
- Glazed Fire Doors in Swanley
- Security Fire Doors in Swanley
- Double & Leaf-and-a-Half Fire Doors in Swanley
- Riser & Service Cupboard Doors in Swanley
- Commercial & Office Fire Doors in Swanley
- Fire Exit Doors in Swanley
- Fire-Rated Screens & Fanlights in Swanley
- Stairwell & Escape Route Doors in Swanley
- Fire Door Ironmongery & Closers across Kent
- All fire doors in Swanley