FD30 Fire Doorsets for Stevenage buildings
We fit FD30 doorsets for flats, offices, HMOs and corridors in Stevenage and the rest of Hertfordshire. The process is simple: we survey and measure each opening, propose a certified doorset for it, and give you a fixed price. Fitting is booked once the doorsets are made, usually with no door left out of action overnight.
We cover SG1 and the surrounding area, including Hitchin. Tell us your postcode and preferred dates and we'll confirm a survey slot.
What the law says in Stevenage
In Stevenage, as across England, Approved Document B governs new work and the Fire Safety Order 2005 governs existing premises. Note that Approved Document B is removing the BS 476 fire-resistance test references on 2 September 2029, so specifications are moving to EN classifications such as E30 Sa.
Cost of FD30 fire doors in Hertfordshire
Expect roughly £750–£1,150 per single doorset for FD30 fire doors, fitted, ex VAT. Your Stevenage quote is fixed after survey and itemised door by door.
We show each door's price separately, so if budget is tight you can phase the work and start with the doors your fire risk assessment prioritises.
Where FD30 fire doors are used in Stevenage
Plant rooms and stores and hotel corridors are among the most common settings for FD30 fire doors, in Stevenage as elsewhere.
Hertfordshire's new towns — Stevenage, Hatfield, Welwyn Garden City — sit alongside commuter towns with office-to-residential conversions.
- Plant rooms and stores
- Hotel corridors
- Offices and retail back-of-house
- HMO bedrooms and kitchens
What you get with each doorset
| Fire resistance | 30 minutes integrity (FD30 / E30); EI30 where insulation is specified |
|---|---|
| Typical leaf | 44mm timber, flush or with vision panel |
| Test evidence | BS 476-22 or BS EN 1634-1, plus the manufacturer's field of application |
| Closer | Overhead closer to BS EN 1154 (except locked cupboards) |
| Hinges | Three CE/UKCA-marked hinges to BS EN 1935, grade 13 typical |
See the full specification and options for FD30 Fire Doorsets
From enquiry to handover
- Send your postcode, door count and any fire risk assessment notes
- We survey and measure each opening for free
- You get a fixed, itemised quote with certificate references
- We fit, test operation and hand over the paperwork
Common questions in Hertfordshire
Can you work around tenants or staff in Stevenage?
Yes. We phase work in occupied buildings and keep escape routes available. Each door is planned to be removed and replaced the same day; if that isn't possible, the opening is made secure and we tell you in advance.
How quickly can you survey in Stevenage?
We arrange surveys around your access needs and, where possible, combine Stevenage visits with other work in Hertfordshire. Tell us your preferred dates when you enquire.
What does a Stevenage quote include?
Survey, certified doorset, ironmongery, installation, removal of old doors and a handover pack. VAT is added at the standard rate.
Can I fit an FD30 door into my existing frame?
Only if the manufacturer's evidence allows that frame, which is rare. We normally supply the complete doorset with a new frame so the certification carries through to the finished job.
Also covering towns near Stevenage
- Hitchin (5 miles)
- Letchworth Garden City (6 miles)
- Welwyn Garden City (7 miles)
- Harpenden (9 miles)
- Hertford (9 miles)
- Luton (9 miles)
Other products in Stevenage
- Fire Doors for Homes in Stevenage
- Composite Fire Doors in Stevenage
- Glazed Fire Doors in Stevenage
- Fire Exit Doors in Stevenage
- Double & Leaf-and-a-Half Fire Doors in Stevenage
- Fire Door Ironmongery & Closers in Stevenage
- Commercial & Office Fire Doors in Stevenage
- Fire Door Supply & Fit in Stevenage
- FD30 Fire Doorsets across Hertfordshire
- All fire doors in Stevenage